PICSCOAT Flexible Acrylic Renovator...
Refurbishes driveways, paths, pavements and car parks.

• Enhance the appearance of your driveway to an 'as new' look.
• Commercial quality
• Upgrade drab, grey, oil stained tarmac surfaces
• Avoid expensive resurfacing
• Extend the life of the surface
• Cover ingrained dust from building works, spillage paint etc.
• Anti-slip finish.
• Easy to apply
• Added value to your property
• Every Order comes with a Free Instructional DVD

Colour Container Size Qty (no of containers) BLACK 25 Litres (£97.95) + Vat add to cart BLACK 5 Litres (£35.00) + Vat add to cart DARK RED 25 Litres (£103.73) + Vat add to cart DARK RED 5 Litres (£42.50) + Vat add to cart GREEN 25 Litres (£103.73) + Vat add to cart GREEN 5 Litres (£42.50) + Vat add to cart

view cart

Please note: Carriage and Vat is charged on all Sealant orders and will be calculated on the 'shopping cart' page.

Areas of Use
Pave-Saver can be applied to pavements,
pedestrian areas, forecourts, car parks, roofs,
terraces, floors, stairs - practically any high traffic
masonry area which requires protection!

The Ultimate in Pavement and Floor Protection!
Due to its exceptional penetration and stain repellent properties, Pave-Saver, supplied by Spinaclean ltd, is ideally suited to the protection of a wide variety of outdoor and indoor masonry surfaces that are subjected to heavy foot traffic.

Pave-Saver protects surfaces from weathering and helps surfaces remain clean by repelling chewing gum, water, airborne dirt, acid rain, smog, industrial pollutants, oil and grease, dust and organic growth (lichens & moss).

Rain water will remove most stains as the pollutant is prevented from sticking to the substrate. Pave-Saver offers this high level of protection by effectively reducing the adhesion rate of the pollutant, whilst still enabling the underlying materials to breathe.

Pave-Saver also prevents surface flaking through repeated freeze/thaw cycles. Once applied it is invisible, essentially forming part of the substrates fabric and therefore offering high resistance to abrasion

Application Guide
Surface to be treated must be free from chewing gum, dust, dirt, oil, efflorescence, mould/algae, old
paint, other surface contaminants.

Clean surface thoroughly using a Spinaclean’s paving cleaning machines or similar) prior to application. The substrate should be dry, with surface and ambient temperatures between 5ºC and 35ºC. Pave-Saver can be applied by brush, roller, squeegee, back pack sprayer or low pressure spray. Surface to be treated must be fully saturated. This will require between 1 and 3 coats applied wet on wet dependant on substrate porosity (see guide).

view cart

Please note: Carriage and Vat is charged on all Sealant orders and will be calculated on the 'shopping cart' page.

• 2 x Rollers
• Roller Pole
• Tray
• 4" Edging Brush
• Protective Gloves

Only available with orders of 25 litres or more

Please note: We only recommend sealing your paving if it is clean from moss, weeds, dirt, stains and algae. If your surface is not in this condition and you are unable to clean it, please see the Directory of Professional Paving and Sealing Companies throughout the UK

Call 01327 831604 for FREE and friendly advice

• 2 x Rollers
• Roller Pole
• Tray
• 4" Edging Brush
• Protective Gloves
• Mixing Paddle
• Instructional DVD

Only available with orders of 20 litres or more

Please note: We only recommend sealing your paving if it is clean from moss, weeds, dirt, stains and algae. If your surface is not in this condition and you are unable to clean it, please see the Directory of Professional Paving and Sealing Companies throughout the UK

Call 01327 831604 for FREE and friendly advice